Wednesday, 15 February 2017

4-20ma diesel fuel tank engine oil magnetostrictive ball float level sensor


Technical Parameters

Measuring range:0.3~4m(can customize according to user’s request)

Safety Barrier input voltage: DC12V/40mA

Communication protocol:RS485
Baud rate:2400BPS
Transfer distance: 1.5Km

Measuring accuracy:±1mm

Repetition: 0.3mm

Resolution:
0.1mm

Nominal working pressure: 0~0.6MPa 0~1.6MPa 0~2.5MPa

Working medium density:0.4~1.3g/cm3

The material of the probe and the Electronic housing: 316L stainless steel probe

The probe is used for exactly measuring tanks and it had been applied in the fields of gas station, chemical industry, foodstuff and pharmacy.

magnetostrictive probe :https://www.kunlunsensors.com/productpage.php?pid=48

magnetostrictive level sensor :https://www.kunlunsensors.com

Magnetostrictive level sensor for siliceous sand

KunLun Magnetostrictive Probe is designed based on magnetostrictive theory. The
electronic parts of the probe produce a low-voltage electric current "inquiring" pulse, at the same time the pulse produces a magnetic field which travels downwards along the waveguide. Because there are a group of magnets which also produce a magnetic field inside the floater which is moving up and down with the change of the liquid level, there are two magnetic fields in the probe. When two magnetic fields meet, the waveguide will twist and one wave will be produced, we call it the "returning" pulse. Then the electronic parts detect the cycle from producing the pulse of "inquiring" to receiving the pulse of "returning", i.e. the corresponding accurate change of liquid level. Installing temperature sensors inside the probe can make it detect and transfer the liquid temperature continuously at the same time.

magnetostrictive sensors :https://www.kunlunsensors.com

Tuesday, 25 October 2016

Magnetostrictive alcohol liquid level sensors


KunLun Magnetostrictive Probe is used for measuring product level and it provides high precision. The probe has advantages such as steadiness,reliability,long-life,finished frame and strong adaptability. It can be installed at the top of tanks and the tank doesn’t need to be cleaned. So it also has advantages such as safety, convenience and fast installation. The probe is designed and certificated according to the need of GB3836-2000 “Explosion-proof Power Equipment for Explosive Atmosphere”. Its Explosion-proof Label is ExiaⅡCT6, Certificate NO is CE102091. China Metrology Certification : 05000128 of Hebei Province.

magnetostrictive probe :http://www.kunlunindustry.com

magnetostrictive level sensors :https://twitter.com/AndyZhang01

4-20mA magnetostrictive oil level meter/sensor for gas station


1. All parts can be fixed in the right order, cannot be reversed.
2. The inner Ex-proof barrier must be Ex-proof cement plugging to avoid oil or gas into monitor office
3. Sealing parts must tighten cable well to avoid oil and gas infiltration.
4. All parts must be fully tightened.
5. Cable in the junction box should be 15-20cm

magnetostrictive level sensors :http://www.kunlunindustry.com

magnetostrictive probe :https://plus.google.com/118213640984198911762


Monday, 10 October 2016

Magnetostrictive alcohol liquid level sensors


The tank unloading/discharge port direction can not face the probe in order to avoid damage. Keep the probe far from unloading port and submersible pump. You must measure the fuel heights before and after fuel unloading, then get the deviation from comparison between the heights and values from
probe.
Cautions:
1.Use antistatic tools during installation, such as bronzewrench, screw driver and so on.
2.Make sure the probe in right angle (vertical) during installation. Any tilt will affect fuel height and volume accuracy.
3.Do not force the communication lines during the installation

magnetostrictive probe :http://www.kunlunindustry.com

4-20mA magnetostrictive oil level meter/sensor for gas station



Probe installation

1)Choose right probe according to tank, manhole height and other parameters.
2)Take out the probe from package. Prevent the probe from deformation and scratches.
3)Remove the packing foam.
4)Install the fixed disk on the both ends of electrical area.
5)Connect the communication line into electrical area and tighten ht eplug.
6)Place fuel float, water float on the bottom of probe.

magnetostrictive level sensors :http://www.kunlunindustry.com

Tuesday, 4 October 2016

Magnetostrictive Liquid Level Sensor


When electrical pulse annular magnetic field meets with floater intrinsic magnetic field, both of the field vectors add together to form spiral magnetic field to produce instantaneous torque force and form a mechanical torque force wave on the aveguide wire to transfer back to electrical probe at a certain speed nso as to create induction pulse on both ends of the coil.

Through measurement of time difference between induction pulses produced by electrical pulse and torque force wave, it can accurately calculate the height of liquid level. Fixing high accurate temperature sensor in the measuring pole can measure medium temperature.


magnetostrictive probe :http://www.kunlunindustry.com