Magnetostrictive alcohol liquid level sensors

KunLun Magnetostrictive Probe is used for measuring product level and it provides high precision. The probe has advantages such as steadiness，reliability，long-life，finished frame and strong adaptability. It can be installed at the top of tanks and the tank doesn’t need to be cleaned. So it also has advantages such as safety, convenience and fast installation. The probe is designed and certificated according to the need of GB3836-2000 “Explosion-proof Power Equipment for Explosive Atmosphere”. Its Explosion-proof Label is ExiaⅡCT6, Certificate NO is CE102091. China Metrology Certification : 05000128 of Hebei Province.

magnetostrictive probe :http://www.kunlunindustry.com

magnetostrictive level sensors :https://twitter.com/AndyZhang01

4-20mA magnetostrictive oil level meter/sensor for gas station

1. All parts can be fixed in the right order, cannot be reversed.

2. The inner Ex-proof barrier must be Ex-proof cement plugging to avoid oil or gas into monitor office

3. Sealing parts must tighten cable well to avoid oil and gas infiltration.

4. All parts must be fully tightened.

5. Cable in the junction box should be 15-20cm

magnetostrictive level sensors :http://www.kunlunindustry.com

magnetostrictive probe :https://plus.google.com/118213640984198911762

Magnetostrictive alcohol liquid level sensors

The tank unloading/discharge port direction can not face the probe in order to avoid damage. Keep the probe far from unloading port and submersible pump. You must measure the fuel heights before and after fuel unloading, then get the deviation from comparison between the heights and values from

probe.

Cautions:

1.Use antistatic tools during installation, such as bronzewrench, screw driver and so on.

2.Make sure the probe in right angle (vertical) during installation. Any tilt will affect fuel height and volume accuracy.

3.Do not force the communication lines during the installation

magnetostrictive probe :http://www.kunlunindustry.com

4-20mA magnetostrictive oil level meter/sensor for gas station

Probe installation

1）Choose right probe according to tank, manhole height and other parameters.
2）Take out the probe from package. Prevent the probe from deformation and scratches.
3）Remove the packing foam.
4）Install the fixed disk on the both ends of electrical area.
5）Connect the communication line into electrical area and tighten ht eplug.
6）Place fuel float, water float on the bottom of probe.

magnetostrictive level sensors :http://www.kunlunindustry.com

Magnetostrictive Liquid Level Sensor

When electrical pulse annular magnetic field meets with floater intrinsic magnetic field, both of the field vectors add together to form spiral magnetic field to produce instantaneous torque force and form a mechanical torque force wave on the aveguide wire to transfer back to electrical probe at a certain speed nso as to create induction pulse on both ends of the coil.

Through measurement of time difference between induction pulses produced by electrical pulse and torque force wave, it can accurately calculate the height of liquid level. Fixing high accurate temperature sensor in the measuring pole can measure medium temperature.

magnetostrictive probe :http://www.kunlunindustry.com

High accuracy magnetostrictive level sensor water flow sensor for industry

Magnetostrictive level sensors is core of intelligent magnetostrictive tank gauge, and The core part of sensor is waveguide wire with high strain value and great mechanical wave transformation ability to change small magnetic field vector into mechanical wave.
The sensor is composed of electronic probe, stainless steel bar(built-in super rare earth magnetostriction silk) and floater (built-in permanent magnet). When electrical impulses produced by pulse generator in probe transfer along waveguide wire of pipe, electrical impulses produce an annular magnetic field perpendicular to the waveguide wire to transfer at the light speed along the wire.