Magnetostrictive alcohol liquid level sensors

KunLun Magnetostrictive Probe is used for measuring product level and it provides high precision. The probe has advantages such as steadiness，reliability，long-life，finished frame and strong adaptability. It can be installed at the top of tanks and the tank doesn’t need to be cleaned. So it also has advantages such as safety, convenience and fast installation. The probe is designed and certificated according to the need of GB3836-2000 “Explosion-proof Power Equipment for Explosive Atmosphere”. Its Explosion-proof Label is ExiaⅡCT6, Certificate NO is CE102091. China Metrology Certification : 05000128 of Hebei Province.

magnetostrictive probe :http://www.kunlunindustry.com

magnetostrictive level sensors :https://twitter.com/AndyZhang01

4-20mA magnetostrictive oil level meter/sensor for gas station

1. All parts can be fixed in the right order, cannot be reversed.

2. The inner Ex-proof barrier must be Ex-proof cement plugging to avoid oil or gas into monitor office

3. Sealing parts must tighten cable well to avoid oil and gas infiltration.

4. All parts must be fully tightened.

5. Cable in the junction box should be 15-20cm

magnetostrictive level sensors :http://www.kunlunindustry.com

magnetostrictive probe :https://plus.google.com/118213640984198911762

Magnetostrictive alcohol liquid level sensors

The tank unloading/discharge port direction can not face the probe in order to avoid damage. Keep the probe far from unloading port and submersible pump. You must measure the fuel heights before and after fuel unloading, then get the deviation from comparison between the heights and values from

probe.

Cautions:

1.Use antistatic tools during installation, such as bronzewrench, screw driver and so on.

2.Make sure the probe in right angle (vertical) during installation. Any tilt will affect fuel height and volume accuracy.

3.Do not force the communication lines during the installation

magnetostrictive probe :http://www.kunlunindustry.com

4-20mA magnetostrictive oil level meter/sensor for gas station

Probe installation

1）Choose right probe according to tank, manhole height and other parameters.
2）Take out the probe from package. Prevent the probe from deformation and scratches.
3）Remove the packing foam.
4）Install the fixed disk on the both ends of electrical area.
5）Connect the communication line into electrical area and tighten ht eplug.
6）Place fuel float, water float on the bottom of probe.

magnetostrictive level sensors :http://www.kunlunindustry.com

Magnetostrictive Liquid Level Sensor

When electrical pulse annular magnetic field meets with floater intrinsic magnetic field, both of the field vectors add together to form spiral magnetic field to produce instantaneous torque force and form a mechanical torque force wave on the aveguide wire to transfer back to electrical probe at a certain speed nso as to create induction pulse on both ends of the coil.

Through measurement of time difference between induction pulses produced by electrical pulse and torque force wave, it can accurately calculate the height of liquid level. Fixing high accurate temperature sensor in the measuring pole can measure medium temperature.

magnetostrictive probe :http://www.kunlunindustry.com

High accuracy magnetostrictive level sensor water flow sensor for industry

Magnetostrictive level sensors is core of intelligent magnetostrictive tank gauge, and The core part of sensor is waveguide wire with high strain value and great mechanical wave transformation ability to change small magnetic field vector into mechanical wave.
The sensor is composed of electronic probe, stainless steel bar(built-in super rare earth magnetostriction silk) and floater (built-in permanent magnet). When electrical impulses produced by pulse generator in probe transfer along waveguide wire of pipe, electrical impulses produce an annular magnetic field perpendicular to the waveguide wire to transfer at the light speed along the wire.

Automatic temperature compensation Explosion-proof Ultrasonic magnetostrictive level sensor

Intelligent Smart magnetostrictive tank probe Introduction

The intelligent magnetostrictive tank probe adopts magnetostrictive principle. It is a liquid level measuring device with high accuracy, reliable performance, long life span, perfect structure and widetemperature range.The probe can measure multiple interfaces and liquid temperature.Ex-proof mark

magnetostrictive probe :http://www.kunlunindustry.com

Oil Fuel Magnetostrictive Floats Level Sensor

Tank construction requirements
For new station, the probe should be installed in the middle of tank. The distance between probe and discharging/unloading tube, submersible pump should be more than 1 meter. Otherwise, the probe accuracy will be reduced and probe will be damaged. Pay attention to adjusting oil outlet direction of discharging tube
to make oil flow direction back to the probe. The riser/rising tube must be vertical welding. .

Remarks:
Either new or old station, the installation hole of probe and tank manhole must be on the axis of the oil tank, so as to ensure the probe and tubing, discharge tubing are installed vertically. If is submersible pump,the direction of discharge outlet can not be opposite the submersible pump

magnetostrictive level sensors :http://www.kunlunindustry.com

Display ultrasonic water tank liquid level indicator magnetostrictive sensor

1.All grounded cables should use soft copper lines and the diameter>4≥
mm2;
2.Ground flat iron should be connected to the earthing system of gas
station;
3.Both ends of 6’ galvanized pipe should be welded to the earth bolts and
grounded cables should be connect to the ground flat iron;
4.Both ends of the 6’ galvanized pipe should be sealed;
5.The 6’galvanized pipe should be deeper than 200 mm underground;
6.Both ends of the wiring groove should be sealed, and at the turning of
the wiring groove should be installed the elbow;
7.The wiring groove installation must be beautiful (vertical and horizontal).

magnetostrictive level sensors :http://www.kunlunindustry.com

ATEX approve magnetostrictive diesel level sensors ,magnetostrictive level transmitter

Underground tanks must have a riser pipe available for mounting of a probe, The location of the pipe should be as near to the center of the tank as possible. The riser pipe should be a standard 3 inch pipe to allow for adequate space for insertion of the probe and floats

magnetostrictive probe :http://www.kunlunindustry.com

High precision liquid water magnetostrictive level sensor

Magnetostrictive probe is basic monitoring and data collection tools at gas station. During oil measurement of UST, product level, water level, temperature and volume can be read in real time.
Digitalization:
1.EIA-485 communication. Anti-interference:
2.With entire digital modules, EMI/ RFI and Surge Voltage protected. Lightning protected. Long cable runs.
3.High performance:
Magnetostrictive design, product level and water level measuring accuracy reaches ±0.5mm.

Stainless Steel Magnetostrictive Level Sensor

Good cost performance
1.High performance and digitalization probes
2.Flush-type console: more stability and safety
3.Higher safety: China & EU explosion-proof certifications
4. takes good consideration on different conditions and countries, and researches and develops suitable products according to different customers from different countries.

magnetostrictive level sensors :http://www.kunlunindustry.com

China supplier high accuracy fuel level sensor magnetostrictive water level sensor oil pressure sensor

Chinese company, with own R&D team, Accu provides service for the downstream oil and gas industry, magnetostrictive level sensors and focuses on petroleum products transfer and distribution field.
Kunlun  was established in 2001. While it has began to research digital magnetostrictive automatic tank gauge Kunlun is a high-tech enterprise specializing in R&D, manufacture, sale and implementation service in oil industry.

Magnetostrictive liquid float level

The heart of a magnetostrictive gauge is the waveguide which is made of special proprietary material. Magnetostrictive probe is excited via a current pulse which creates a magnetic field. Another magnetic field, caused by permanent magnets in the float(s), interacts with this magnetic field, creating a twist or “ torsional strain pulse” which travels up and down the waveguide at a very high speed. The difference in time between the initial current pulse and the return torsional pulse is used to determine
product and interface levels. This technology provides extremely accurate and highly repeatable measurements.

Magnetostrictive Probe

KunLun magnetostrictive level sensors is Designed based on magnetostrictive principle.

Technical Parameters:

Measuring range:0.3~4m（can customize according to user’s request）
Safety Barrier input voltage: DC12V/40mA
Communication protocol: Modbus RS485 or 4-20mA    Baud rate:2400BPS
Transfer distance: 1500m
Measuring accuracy:±1mm
Repetition: 0.3mm
Resolution:  0.1mm
Temperature measuring number: 1 ~ 5
Temperature measuring range:-40°C ~ 125°C
Temperature Precision:±0.5°C
Temperature Resolution:0.0625°C
Protective Grade/Explosion-proof label: IP67/Exia II CT6
Nominal working pressure: 0~0.6MPa 0~1.6MPa 0~2.5MPa
Working medium density:0.4~1.3g/cm3
The material of the probe and the Electronic Storehouse: 316L stainless steel probe
The probe is used for exactly measuring tanks and it had been applied in the fields of gas station, chemical industry, foodstuff and pharmacy.

Applied liquid products
Gasoline
 Diesel
Kerosene
Ethanol Gasoline
Bio Diesel
Water
Other approved light oil products

Data measured
Product level
Water level
Temperature
Product inventory
Empty capacity (Order capacity)

Features
Transfer probe data to console in real time, including product level, water level,temperature
5 points temperature sensors offer precision measurement as the basis of temperature compensation and leak detection
Digital signal transmit have remarkable highlights than traditional analog signals,especially on high anti-interruption ability, enhance long distance communication as 500m, and higher security.
Leak detection ability support 0.38Liter/Hour, and 0.76Liter/Hour, static and dynamic leak detection connects with console. This programmable Leak Detection can be set detect by daily,weekly, monthly or annually.